70RA/P.AO

The 70RA/P chain saw is the

best selling bank saw in the world!

The 70RA/P is designed to execute horizontal and vertical cuts of marble and other tough stones without the need for water cooling.

Cutting Depth: 16' 9" max

Cutting Speed: 5 in/min

Arm Rotation: 360°

70RABU

The 70RABU is designed to execute horizontal and vertical cuts of marble and other tough stones without the need for water cooling.

The main feature is the single rail that allows it to be rapidly repositioned longitudinally and without the need for lifting equipment.

Cutting Depth: 16' 9" max

Cutting Speed: 5 in/min

Arm Rotation: 360°

70RATA

The 70RABU is designed to execute horizontal and vertical cuts of marble and other tough stones without the need for water cooling.

Thanks to the presence of PLC and Encoders, its main feature is the ability to perform vertical and horizontal cuts in unattended mode by setting the cutting measurements (depth and length) before execution.

Cutting Depth: 16' 9" max

Cutting Speed: 5 in/min

Arm Rotation: 360°

70SUPER-H

The 70 Super-H is the most powerful model in the Fantini range. It provides excellent results with both marble and other types of hard stone.

The 70SUPER-H can execute horizontal and vertical cuts without the need for water cooling.

Cutting Depth: 26' 3" max

Cutting Speed: 6 in/min

Arm Rotation: 360°

50.81

The 50.81 is designed for use on medium hardness stone.

The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P) or single rail (BU), version. In the single rail (BU) configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.

Cutting Depth: 11' 2" max

Cutting Speed: 5 in/min

Arm Rotation: 360°

50.90

The Fantini 50.90 is designed for cutting medium soft stone and cutting and squaring in quarries with sloped banks.

The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (RA/P) or single rail (BU), version. In the single rail (BU) configuration, the machine can be repositioned by moving it along a single rail, without the need for lifting equipment.

Cutting Depth: 6' 7" max

Cutting Speed: 10 in/min

Arm Rotation: 360°

GU50-R-SC/T

The GU50-SC is our compact model for tunnel extraction work.

By setting the cutting depth in automatic mode, the machine makes vertical and horizontal cuts against the tunnel face.

It is self-propelled on a track and radio-controlled, making its movements completely autonomous. Only one operator is sufficient to operate the machine.

Cutting Depth: 6' 6"

Chain Rotation Speed: 0- 5'5" /sec

Tunnel Height: 6' 6"

SV-C 50

The SV50 is a special version of the family for tunnel excavations.

This machine is designed to perform the rear cutting of the blocks while the tunneling advances forwards.

Cuts of up to 5' 3" (on both the right and left-hand sides)

Chain Rotation Speed: 0- 2'4" /sec

Tunnel Height: 18' 6" max

70BU-C

The 70BU-C is a self-propelled saw designed for making cuts into quarry floors and squaring blocks without the need for water.

The saw uses a diesel engine that creates an entirely autonomous operation, eliminating the need for any electrical connections to generators or power grids.

Cutting Depth: 26' 3" max

Cutting Speed: 6 in/min

Arm Rotation: 360°

TERNA

Extremely versatile, the Terna allows you to quickly reach anywhere in the quarry, whether it's blocks spread over the quarry, banks on the ground, or even cuts executed directly at the front of the bank.

As the Terna travels to the block and not the other way round, the Terna saves you time.

The operator works from a cabin, protected from atmospheric agents, without needing auxiliary staff. The cuts are executed dry.

Cutting Depth: 11' 2" max

Cutting Speed: 5 in/min

Arm Rotation: 180°

SVC-70

The SV-C/70 chainsaw is designed to execute vertical and frontal cuts on large banks or large blocks in stone quarries. The saw does not require water cooling.

The SV-C/70 is mounted on a fifth wheel track system enabling it to traverse even the most challenging terrain.

Cutting Depth: 6' 7" max

Cutting Speed: 10 in/min

Arm Rotation: 360°

SQB/P

The SQB/P is a sectioning saw made up of a portal that runs on tracks and a horizontal arm for squaring off and blocking hard and/or abrasive stones.

The cuts can be programmed using a computerized system loaded with positioning and cutting parameters. Once the cutting sequence is programmed, the machine operates in an automatic cycle. Automatic cycles allow you to cut even at night, without the need for an operator.

• Installed power : 85 HP
• Max. Cutting Width : 3,500/4,000 mm
• Max. Cutting Height : 2,500 mm
• Variable Chain Speed: 0-2 metres/ sec
• Variable Arm Descent: 0-15 cm/min
• Width of Cut: 27 mm – 38 mm

SQB/P/E

The SQB/P/E is a sectioning saw made up of a portal that runs on tracks and a horizontal arm for squaring off and blocking hard and/or abrasive stones.

The cuts can be programmed using a computerized system loaded with positioning and cutting parameters. Once the cutting sequence is programmed, the machine operates in an automatic cycle. Automatic cycles allow you to cut even at night, without the need for an operator.

• Installed power : 68 HP
• Max. Cutting Width : 3,500/4,000 mm
• Max. Cutting Height : 2,500 mm
• Variable Chain Speed: 0-2 metres/ sec
• Variable Arm Descent: 0-15 cm/min
• Width of Cut: 27 mm – 38 mm